[SI-LIST] Logic Level Translator

[Praveen Kumar]

I was looking for RFFE 1.8V to 1.2V logic level translator since the BOM is
1.8V only logic while the slave is 1.2V only.
besides the problem of such a part not being available, for time being If a
simple resistive voltage divider is used are there any known issues with
this approach.
like rise-time degradation ?

Thanks,
Praveen


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-***@freelists.org with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-***@freelists.org with 'help' in the Subject field


List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:
http://www.freelists.org/archives/si-list

Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu

[Praveen Kumar]

Never mind, it works for Single ended signals but not for bidirectional.

Post by Praveen Kumar
I was looking for RFFE 1.8V to 1.2V logic level translator since the BOM
is 1.8V only logic while the slave is 1.2V only.
besides the problem of such a part not being available, for time being If
a simple resistive voltage divider is used are there any known issues with
this approach.
like rise-time degradation ?
Thanks,
Praveen

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-***@freelists.org with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-***@freelists.org with 'help' in the Subject field


List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:
http://www.freelists.org/archives/si-list

Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu